ALM0116 - Outbound Dialer failed to execute Outbound Callflow

Expand / Collapse
 

ALM0116 - Outbound Dialer failed to execute Outbound Callflow


Article ID: 51867 - Last Review: August 1, 2013

DESCRIPTION

The Outbound Dialer will fail to execute an Outbound call flow for the following reasons:
1.   The Outbound ports are Out of Service.
2.   All Outbound ports are in use.
3.   Outbound call flow is disabled. 


SEVERITY

Warning 



IMPACT

VWM Outbound dialer is either not making any calls, or partially making calls.
 

TROUBLESHOOTING STEPS



Ports Out of Service: 

1. Ensure that the ports are programmed correctly on the switch.
2. In YourSite Eplorer, under Extensions, ensure the Extension Type of the port is must be set to Outbound Port 5020IP
3. Ensure that there are ports associated to an Outbound call flow.

All Outbound Ports are in use:
1. If all running ports are in a call, this is an indication that you need to add more Outbound ports to process all the remaining requests.

Outbound call flow is disabled:
1. Check your Outbound call flow and make sure that Always Run is checked on the property page of the call flow.
 


APPLIES TO

6.0.1 and up

NOTE: This event code will no longer be used in version 7.0

Keywords: alm0116 outbound dialer failed to execute call flow



Rate this Article:
     

Add Your Comments


Name: *
Email Address:
Web Address:
Verification Code:
*
 

Details
Last Modified:Thursday, August 01, 2013
Last Modified By: amontpetit
Type: INFO
Article not rated yet.
Article has been viewed 8,568 times.
Options