Article ID: 51523 - Last Review: May 2nd, 2012
DESCRIPTION
SMDR Record Transfer is set to "No" on the PBX.
Select "Yes" if an SMDR record is to be generated after each outgoing call transfer, stating the duration and number of meter pulses for that user's portion of the call.
SEVERITY
Minor
IMPACT
This setting must be set to "Yes" for accurate reporting on Outbound Call Transfers.
TROUBLESHOOTING STEPS
1. Open the 3300 ESM.
2. On the left, click on System Properties => System Feature Settings => SMDR Options.
3. Click Change.
4. Set SMDR Record Transfer to Yes.
5. Click Save.
NOTE: This alarm will need to be cleared manually by going to YourSite Explorer and clicking on Alarms. Select the alarm in question and click the Snooze button.
APPLIES TO
CCM 6.0 SP1
Keywords: SMDR Record Transfer ALM0076